Control voltage: 24V DC
Working pressure: 6-8bar
Working voltage: 10-30V DC
Cutting time: 1S
Robot Torch Cleaning Station Features:
● Two independent stations for wire cutting and slag cleaning and oil spraying.
● It can be attached to the welding worktable, or optional aluminum worktable.
● Adopt pneumatic motor, stable speed, efficient cleaning of welding slag.
● Can be connected to any welding robot.
● The reamer can be replaced with various sizes.
Robot Torch Cleaning Station Technical Parameters
Compressed air connector | Trachea inner dia. | Nominal pressure | Working voltage |
G1/4 | Least ∅6mm | 6 bar | 6-8 bar |
Control voltage | Single valve power consumption | Working voltage | Current consumption |
24V DC | 2.8W | 10-30V DC | About 4mA(24V) |
Single continuous current | Nominal speed of air motor | Air consumption | Oil bottle capacity |
100mA(MIN) | 650rpm / min | About 400L/min | 1L |
Cutting ability under 6 bar | Solid wire | Cutting time | |
1.2mm(MIN) | 1s |